iTech Cables - angelina's Blog

angelina's Blog

iTech Cables

Posted on December 9, 2019 at 02:59 PM.

iTechCables is manufacturer of all CMP rated cables, together with Superior quality RJ45 connector, patch cables, keystone jacks, Wall Plates, and other accessories, By providing a five-star administrations to our Cables customers, for custom cables as well as your structured cabling projects you should simply call us or send us an e-mail.

(Cat 6), is a standardized twisted pair cable for Ethernet and other network physical layers that is backward compatible with the Category 5/5e and Category 3 cable standards. Cat 6 has to meet more stringent specifications for crosstalk and system noise than Cat 5 and Cat5e. The cable standard specifies performance of up to 250 MHz, compared to 100 MHz for Cat 5 and Cat 5e.

Whereas has a reduced maximum length of 55 meters when used for 10GBASE-T, Category 6A cable (or Augmented Category 6) is characterized to 500 MHz and has improved alien crosstalk characteristics, allowing 10GBASE-T to be run for the same 100 meter maximum distance as previous Ethernet variants.

Installation requirements:

Category 6 and 6A cable must be properly installed and terminated to meet specifications. The cable must not be kinked or bent too tightly; the bend radius should be larger than four times the outer diameter of the cable. The wire pairs must not be untwisted and the outer jacket must not be stripped back more than 1/2" (12.7 mm).

Cable shielding may be required in order to improve a Cat 6 cable's performance in high electromagnetic interference (EMI) environments. This shielding reduces the corrupting effect of EMI on the cable's data. Shielding is typically maintained from one cable end to the other using a drain wire that runs through the cable alongside the twisted pairs. The shield's electrical connection to the chassis on each end is made through the jacks.

The requirement for ground connections at both cable ends creates the possibility that a ground loop may result if one of the networked chassis is at different instantaneous electrical potential with respect to its mate. This undesirable situation may compel currents to flow between chassis through the network cable shield, and these currents may in turn induce detrimental noise in the signal being carried by the cable.

Maximum length:

When used for 10/100/1000BASE-T, the maximum allowed length of a Cat 6 cable is 305 meters (1000ft). This consists of 305 meters (1000ft) of solid "horizontal" cabling between the patch panel and the wall jack, plus 5 meters (16 ft.) of stranded patch cable between each jack and the attached device. For 10GBASE-T, an unshielded Cat 6 cable should not exceed 55 meters and a should not exceed 100 meters
Description

CMP Rated Cable conductors featuring 23 AWG 4 Pairs with unshielded twisted pair (UTP) are Solid Bare Copper, which insures performance with high-speed Gigabit Ethernet.

is the perfect fit for reliable installations where the cable will be used indoors. Our Cat6a Plenum Bare Copper is fire safety rated cable which contains a flame-******ant Plenum jacket that produces less smoke than traditional Plenum jackets. All of our Plenum UTP Cat6a Bare Copper 1000ft Plenum is available in Blue/White/Grey/Black colors and comes on a tough wooden-spool to make the installation easier.

iTechCables meet ANSI/TIA/EIA-568B.2, ISO/IEC 11801 standards up to 500 MHz bandwidth capacity tested with enhanced data & voice and security capabilities and is verified by outside standards organizations including ISO/IEC us as well as being RoHS Compliant. It also supports Ethernet 100BASE-TX, 100BASE-VG and 155 ATM. Particularly-suited for high bandwidth applications such as 622 ATM. Wideband Ethernet 1000BASE-T and emerging applications with anticipated data rates.
650MHz/23AWG/CMP/BC Conductors is best for your indoor voice, data, video, and security networking applications. Some common applications for this kind of cable embody retrofitting; cat6a cable is best for putting in plenum spacing due to its fire-resistive qualities. Whether or not you�re wiring your home, workplace or entire field, iTechCables have the most effective network resolution for you. Get highest qualitative Cat6a plenum rated jacket and conductor is a thousandth solid copper created.

iTechCables offer highest quality Cat6A plenum 4-pair solid conductor terribly low smoke RoHS criticism jacket for indoor local area network networking applications. Cat6A TIA/EIA certified. iTechCables Cat6A protected CMP Rated Plenum Cable is intended for residential/commercial local area network applications and is proof against hearth and warmth, creating it the most effective resolution for installation runs that need plenum rated.

Cat6a local area network cables are eight conductors (4-Pairs) of solid vacant copper with high-density polyethylene (HDPE) insulation and a CMP rated Jacket (fire-resistant).